Sources ASE
Nano-Giga offre une gamme complète à faible coût de sources de lumière à Emission Spontanée Amplifiée (ASE) pour l’industrie et la recherche. Les sources de lumière ASE présentent une excellente performance, y compris en stabilité spectrale et de puissance. En outre, les clients peuvent choisir entre autre la forme du spectre aplatie avec GFF ou non pour mieux répondre à leur besoin. Les sources de lumière ASE sont des sources de stabilité et de haute puissance à large bande ultra conçus pour les applications de mesure et de test optique. Le produit est basé sur la technologie à fibre dopée pour produire l’émission spontanée amplifiée.
La source de lumière ASE couvre une large gamme de longueurs d’onde, y compris la bande C, C + L-Band, et 1050nm. La largeur de spectre large de la source de lumière ASE est idéal pour des applications DWDM, la caractérisation de systèmes et de composants, utilasation dans les sytémes de monitoring à capteurs à fibres.
Sources ASE autres bandes
Discription :
ASE(Amplified Spontaneous Emission) light sources are broadband light sources with high-brightness over a broad spectral range.ral ranges including telecom and other band. These light sources are widely used in applications such as characterization of WDM components, optical sensing and other optical measurements. They can be optimized according to customer requirements, and please feel free to contact nano-giga.
Voir Plus
Band | Model | Wavelength Range (nm) | Total Output Power | Size H x W x D mm | |
dBm | mW | ||||
Telecom Band |
O band | ASE-1300-01 | 1280-1320 | >0 | >1 | 88x260x350 |
ASE-FL7611 | >+8 | >6 | |||
S band | ASE-FL7210 | 1460-1490 | >+7 | >5 | 88x260x350 |
C band | ASE-C-10S | 1530-1560 | >+10 | >10 | 44x112x120 |
ASE-1550-25 | >+14 | >25 | 88x260x350 | ||
ASE-FL7010 | >+16 | >40 | |||
ASE-FL7012 | 1530-1570 | >+16 | >40 | ||
ASE-FL7013 | 1531-1563 | >+16 | >40 | ||
ASE-FL7050 | 1530-1560 | >+22 | >150 | ||
ASE-1560-G20(Gaussian model) | 1560+/-8 | >+13 | >20 | ||
CL band | ASE-CL-13S | 1530-1610 | 44x112x200 | ||
ASE-FL7002 | >+13 | >20 | 88x260x350 | ||
ASE-FL7004 | >+16.5 | >45 | |||
ASE-FL7015 | >+23 | >200 | 130x440x460 | ||
ASE-FL7006-15 | >+15 | >30 | 88x260x350 | ||
ASE-FL7006-17 | >+17 | >50 | |||
SCL band | ASE-FL7701 | 1460-1610 | >+11 | >12 | 88x260x350 |
ASE-FL7701-Option 1001 | 1460-1600 | >+5 | >3 |
Other Band |
550nm band | ASE-0545-0.1 (without isolator) | 540-550 | >-10 | >0.1 | 88x260x350 |
850nm band | ASE-0850-02 (with isolator) | 840-855 | >+3 | >2 | 88x260x350 |
980nm band | ASE-0980-10 (with isolator) | 975-1050 | >+10 | >10 | 88x260x350 |
X (1um) band | ASE-1020-02 (without isolator) | 1000-1040 | >+3 | >2 | 88x260x350 |
ASE-1045-02 (without isolator) | 1010-1080 | >+3 | >2 | ||
ASE-1050-20 (with isolator) | 1015-1100 | >+13 | >20 | ||
2um band | ASE – VASS-Tm-2000-B | 1900-2050 | 10 | 50 | 270(L)x235(w)x105(H) |
Sources ASE bandes C
Discription :
Amonics C-band ASE light source feature high output power, very wide spectral range and high stability against temperature change. Amonics’ C-band ASE light source are available in benchtop or OEM module. In the benchtop unit, the output power, alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob. Also active emission button is used to enhance operation safety. The OEM module version is an ideal building block for OEM system integrators, especially in fiber optic sensing and optical tomography applications. It requires only a single +5V power supply with low power consumption.
Voir Plus
ALS-10 | ALS-15 | ALS-18 | ALS-20 | ALS-23 | |
Output Power | Min.10dBm | Typ.15dBm Min.14dBm | Typ.18dBm Min.17dBm | Typ.20dBm Min.19dBm | Typ.23dBm Min.22dBm |
Min.Spectral Density | -10dBm/nm | -5dBm/nm | -3dBm/nm | 0dBm/nm | +2dBm/nm |
Spectral Range | 1528nm to 1564nm | ||||
Output Stability | < + / -0.02dB (over 8 hrs), < + / -0.005dB (over 5 mins) | ||||
Output Isolation | > 40dB | ||||
Output Polarization | < 5% |
* Other output power models are available upon request
General Environmental Parameters
Parameter | Unit | Benchtop | Module |
Operation Temperature Range | °C | 0 to 40 | 0 to +60 |
Storage Temperature Range | °C | -10 to 70 | -10 to +70 |
Power Supply | V | 80 – 240 VAC, 47 – 63Hz | 5.0 VDC |
Dimensions | mm | 260(W)x330(L)x120(H) | 70(W)x100(L)x14(H) for ALS-10, 100(W)x120(L)x18(H) for ALS-15, 120(W)x200(L)x25(H) for ALS-18, ALS-20, ALS-23 |
Electrical Connector | – | NA | 14-pin MIL Socket |
Protection | – | Pump laser over heat warning | Pump laser over current warning |
LCD Display | mA | Pump Laser Current | NA |
Control | – | Keylock switch, output power | NA |
Computer Interface | – | RS232 or Ethernet | NA |
Optical Connector | – | FC/APC, FC/UPC, SC/APC, SC/UPC | |
Optical Fiber | – | SMF-28 |
Features | Applications | Options |
|
|
|