Sources Laser à Ultra-large Bande
Les sources lumineuses à bande large pour fibres optiques. Le premier est une sources laser supercontinuum à ultra-large bande qui s’étale de 450nm à 2500nm. Le second est une source lumineuse optique large bande 1260nm à 1650nm. Ces sources de lumière optique peuvent être utilisées pour tester les composants optiques tels que, les réseaux de Bragg, les réseaux de Bragg à longue période et d’autres composants passifs. La source lumineuse optique à large bande peut aussi être utilisé pour sonder, pour le biomédical, la tomographie, la métrologie, la microscopie et d’autres applications industrielles.
Source supercontinuum 500nm - 2200nm
Discription :
The UC INSTRUEMNTS’ CA9035 high power super-wide broadband light source system is an unique cover over 1700 nm super-wide broadband high pow er light source with FC connector output. With a total output power of mo re than 800mW covering a broad spectral range of 500nm to 2200nm, the system is a ideal light source for fiber component characterization, fiber sens ing, OCT and other areas . The system is based on a gain- switching diode technology offering unique reliability and performance. Available external modulation allows the use of lock-in amplifie rs for high sensitivity measurement and data communications
Applications :
Fiber optic components characterization
Optical tomography
Fiber sensing
Broadband spectroscopy
Fluoresense spectroscopy
R & D lab test
Avantage:
Super-wide wavelength output: 500 ~ 2200 nm;
High output power: >= 800 mW
Single mode fiber output with FC/PC connector;
High power output stability: <= 1% over 30 mins; < 3% over 8 hours
Voir Plus
Model # | CA035 |
Operation Wavelength | 500 ~ 2200 nm |
-10 dB Bandwide | >= 1700 nm |
Output Total Power | > = 800 mw |
Spectral Density | >= -15 dB/nm |
Connector Type | FC/UPC (Other Adaptor Can Be Customerized) |
Spectral Stability within 15 mins | <= 1% |
Output Power Stability within 8 hrs | <= +/- 3% |
Operation Model | CW |
Fiber Type | Single Mode SFM-28 |
Operation Temperature | 0? +40? |
Storage Temperature | -30?+80? |
Power Supply | AC 110 ~ 220 V ±10%, 50Hz, 20W |
Dimensions | 90 mm H, 220 mm W, 320 mm D |
Weight | 18.0 kg |
Remark:
Stability is tested at room temperature 25±2?after pre-heating 30 minutes .1. Test condition: fixed temperature, CW. 2. Test condition: temperature variation ±2?, CW. |
Sources large bande 1250 - 1650nm
Discription :
Amonics’ ALS-CWDM Super-Wideband light source provides high spectral density, at above -30dBm/nm, across 1250nm to 1650nm. That makes this source the ideal tool for the characterization of CWDM components and communication links in one easy step. This broadband source is also extremely effective in high resolution optical coherent tomography(OCT) applications. In the benchtop unit, the output power, alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob. Also active emission button is used to enhance operation safety.
Voir Plus
Features | Applications | Options | ||
|
|
|
Specifications
CWDM Super-Wideband Specifications
ALS-CWDM | |
Output Power | Min. 10mW |
Spectral Range | 1250nm to 1650nm |
Min. Spectral Density | -30dBm/nm |
Output Stability | < + / -0.02dB (over 8 hrs), < + / -0.005dB (over 5 mins) |
General Environmental Parameters
Parameter | Unit | Benchtop | Module |
Operation Temperature Range | °C | 0 to 40 | 0 to +60 |
Storage Temperature Range | °C | -10 to 70 | -10 to +70 |
Power Supply | V | 80 – 240VAC, 47 – 63Hz | 5.0 VDC |
Dimensions | mm | 260(W) x 330(L) x 120(H) | 156(W) x 210(L) x 32(H) |
Electrical Connector | – | NA | 14-Pin MIL Socket |
Protection | – | SLD over heat warning | SLD over heat warning |
LCD Display | – | SLD Driving Current (mA) | NA |
Control | – | Keylock switch, output power | NA |
Computer Interface | – | RS232 / Ethernet | NA |
Optical Connector | – | FC/APC, SC/APC | |
Optical Fiber | – | Single mode fiber |
Sources large bande 890nm - 1080nm
Discription :
Amonics’ ALS-OCT super-wideband light source provides high spectral density, at above -30dB/nm, across 890nm to 1080nm. That makes this source the ideal tool for the characterization of fiber laser components. This broadband source is also extremely effective in high resolution optical coherent tomography (OCT) applications. In the benchtop unit, the output power, alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob. Also active emission button is used to enhance operation safety.
Voir Plus
Features | Applications | Options | ||
|
|
|
General Environmental Parameters
Parameter | Unit | Benchtop | Module |
Operation Temperature Range | °C | 0 to 40 | 0 to +60 |
Storage Temperature Range | °C | -10 to 70 | -10 to +70 |
Power Supply | V | 80 – 240VAC, 47 – 63Hz | 5.0VDC |
Dimensions | mm | 260(W)x330(L)x120(H) | 156(W)x210(L)x32(H) |
Electrical Connector | – | NA | 14-Pin MIL Socket |
Protection | – | SLD over heat warning | SLD over heat warning |
LCD Display | – | SLD Driving Current (mA) | NA |
Control | – | Keylock switch, output power | NA |
Computer Interface | – | RS232 / Ethernet | NA |
Optical Connector | – | FC/APC, SC/APC | |
Optical Fiber | – | Single mode fiber |
OCT Super-Wideband Specification
ASLD-OCT | |
Output Power | Min. 1mW |
Spectral Range | 890nm to 1080nm |
Min. Spectral Density | -30dBm/nm |
Output Stability | < + / -0.02dB (over 8 hrs), < + / -0.005dB (over 5 mins) |